> For the complete documentation index, see [llms.txt](https://stavr-team.gitbook.io/nodes-guides/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://stavr-team.gitbook.io/nodes-guides/mainnets/pylons/commands.md).
# Commands
## 📚Useful commands📚
## ⚙️Service
**Info**
```python
pylonsd status 2>&1 | jq .NodeInfo
pylonsd status 2>&1 | jq .SyncInfo
pylonsd status 2>&1 | jq .ValidatorInfo
```
**Check node logs**
```python
sudo journalctl -fu pylonsd -o cat
```
**Check service status**
```python
sudo systemctl status pylonsd
```
**Restart service**
```python
sudo systemctl restart pylonsd
```
**Stop service**
```python
sudo systemctl stop pylonsd
```
**Start service**
```python
sudo systemctl start pylonsd
```
**reload/disable/enable**
```python
sudo systemctl daemon-reload
sudo systemctl disable pylonsd
sudo systemctl enable pylonsd
```
**Your Peer**
```python
echo $(pylonsd tendermint show-node-id)'@'$(wget -qO- eth0.me)':'$(cat $HOME/.pylons/config/config.toml | sed -n '/Address to listen for incoming connection/{n;p;}' | sed 's/.*://; s/".*//')
```
## 🥅Working with keys
**New Key or Recover Key**
```python
pylonsd keys add Wallet_Name
OR
pylonsd keys add Wallet_Name --recover
```
**Check all keys**
```python
pylonsd keys list
```
**Check Balance**
```python
pylonsd query bank balances addressjkl1yjgn7z09ua9vms259j
```
**Delete Key**
```python
pylonsd keys delete Wallet_Name
```
**Export Key**
```python
pylonsd keys export wallet
```
**Import Key**
```python
pylonsd keys import wallet wallet.backup
```
## 🚀Validator Management
**Edit Validator**
```python
pylonsd tx staking edit-validator \
--new-moniker "Your_Moniker" \
--identity "Keybase_ID" \
--details "Your_Description" \
--website "Your_Website" \
--security-contact "Your_Email" \
--chain-id pylons-mainnet-1 \
--commission-rate 0.05 \
--from Wallet_Name \
--gas 350000 -y
```
**Your Valoper-Address**
```python
pylonsd keys show Wallet_Name --bech val
```
**Your Valcons-Address**
```python
pylonsd tendermint show-address
```
**Your Validator-Info**
```python
pylonsd query staking validator valoperaddress......
```
**Jail Info**
```python
pylonsd query slashing signing-info $(pylonsd tendermint show-validator)
```
**Unjail**
```python
pylonsd tx slashing unjail --from Wallet_name --chain-id pylons-mainnet-1 --gas 350000 -y
```
**Active Validators List**
```python
pylonsd q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_BONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
```
**Inactive Validators List**
```python
pylonsd q staking validators -oj --limit=3000 | jq '.validators[] | select(.status=="BOND_STATUS_UNBONDED")' | jq -r '(.tokens|tonumber/pow(10; 6)|floor|tostring) + " \t " + .description.moniker' | sort -gr | nl
```
**Check that your key matches the validator (Win - ****Good****. Lose -** [**Bad**](#user-content-fn-1)[^1]**)**
```python
VALOPER=Enter_Your_valoper_Here
[[ $(pylonsd q staking validator $VALOPER -oj | jq -r .consensus_pubkey.key) = $(pylonsd status | jq -r .ValidatorInfo.PubKey.value) ]] && echo -e "\nYou win\n" || echo -e "\nYou lose\n"
```
**Withdraw all rewards from all validators**
```python
pylonsd tx distribution withdraw-all-rewards --from Wallet_Name --chain-id pylons-mainnet-1 --gas 350000 -y
```
**Withdraw and commission from your Validator**
```python
pylonsd tx distribution withdraw-rewards valoper1amx.......g85v07t9ka2tfuhamhldgf8e --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 --commission -y
```
**Delegate tokens to your validator**
```python
pylonsd tx staking delegate Your_valpoer........ "100000000"ubedrock --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Delegate tokens to different validator**
```python
pylonsd tx staking delegate valpoer........ "100000000"ubedrock --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Redelegate tokens to another validator**
```python
pylonsd tx staking redelegate Your_valpoer........ valpoer........ "100000000"ubedrock --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Unbond tokens from your validator or different validator**
```python
pylonsd tx staking unbond Your_valpoer........ "100000000"ubedrock --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
pylonsd tx staking unbond valpoer........ "100000000"ubedrock --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Transfer tokens from wallet to wallet**
```python
pylonsd tx bank send Your_address............ address........... "1000000000000000000"ubedrock --gas 350000 --chain-id=pylons-mainnet-1 -y
```
## 📝Governance
**View all proposals**
```python
pylonsd query gov proposals
```
**View specific proposal**
```python
pylonsd query gov proposal 1
```
**Vote yes**
```python
pylonsd tx gov vote 1 yes --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Vote no**
```python
pylonsd tx gov vote 1 no --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Vote abstain**
```python
pylonsd tx gov vote 1 abstain --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
**Vote no\_with\_veto**
```python
pylonsd tx gov vote 1 no_with_veto --from Wallet_Name --gas 350000 --chain-id=pylons-mainnet-1 -y
```
## 📡IBC transfer
* for exapmle - Pylons -> Osmosis
```python
pylonsd tx ibc-transfer transfer transfer channel-2 Your_OSMOaddress............ "100000"ubedrock --from Pylons_Wallet_Name ---gas 350000 --chain-id=pylons-mainnet-1 -y
```
[^1]:
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:
```
GET https://stavr-team.gitbook.io/nodes-guides/mainnets/pylons/commands.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.