⛓️StateSync/Snapshot

🔥Persistence🔥

MAINNET

Node installation instructions

StateSync Persistence Mainnet

systemctl stop persistenceCore
SNAP_RPC=https://persistence.rpc.m.stavr.tech:443
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.persistenceCore/config/config.toml
persistenceCore tendermint unsafe-reset-all --home /root/.persistenceCore
wget -O $HOME/.persistenceCore/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Persistence/addrbook.json"
curl -o - -L https://persis-m.wasm.stavr.tech/wasm-persis.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.persistenceCore
sudo systemctl restart persistenceCore && journalctl -fu persistenceCore -o cat

SnapShot Mainnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://server-1.stavr.tech/Mainnet/Persistence/persis-snap-1.tar.lz4 | grep "last" && curl -sI https://server-1.stavr.tech/Mainnet/Persistence/persis-snap-1.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop persistenceCore
cp $HOME/.persistenceCore/data/priv_validator_state.json $HOME/.persistenceCore/priv_validator_state.json.backup
rm -rf $HOME/.persistenceCore/data
LATEST_SNAPSHOT=$(curl -s https://server-1.stavr.tech/Mainnet/Persistence/ | grep -oE 'persis-snap-[0-9]+\.tar\.lz4' | while read SNAPSHOT; do HEIGHT=$(curl -s "https://server-1.stavr.tech/Mainnet/Persistence/${SNAPSHOT%.tar.lz4}-info.txt" | awk '/Block height:/ {print $3}'); echo "$SNAPSHOT $HEIGHT"; done | sort -k2 -nr | head -n 1 | awk '{print $1}')
curl -o - -L https://server-1.stavr.tech/Mainnet/Persistence/$LATEST_SNAPSHOT | lz4 -c -d - | tar -x -C $HOME/.persistenceCore
curl -o - -L https://persis-m.wasm.stavr.tech/wasm-persis.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.persistenceCore
mv $HOME/.persistenceCore/priv_validator_state.json.backup $HOME/.persistenceCore/data/priv_validator_state.json
wget -O $HOME/.persistenceCore/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Persistence/addrbook.json"
sudo systemctl restart persistenceCore && journalctl -fu persistenceCore -o cat

TESTNET

Node installation instructions

StateSync Persistence Testnet

SNAP_RPC=https://persistence.rpc.t.stavr.tech:443
peers="[e-mail]:4156"
sed -i 's|^persistent_peers *=.*|persistent_peers = "'$peers'"|' $HOME/.persistenceCore/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.persistenceCore/config/config.toml
persistenceCore tendermint unsafe-reset-all --home /root/.persistenceCore
wget -O $HOME/.persistenceCore/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Persistence/Testnet/addrbook.json"
systemctl restart persistenceCore && journalctl -fu persistenceCore -o cat

SnapShot Testnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://persis-t.snapshot.stavr.tech/persist-snap.tar.lz4 | grep "last" && curl -sI https://persis-t.snapshot.stavr.tech/persist-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop persistenceCore
cp $HOME/.persistenceCore/data/priv_validator_state.json $HOME/.persistenceCore/priv_validator_state.json.backup
rm -rf $HOME/.persistenceCore/data
curl -o - -L https://persis-t.snapshot.stavr.tech/persist-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.persistenceCore --strip-components 2
mv $HOME/.persistenceCore/priv_validator_state.json.backup $HOME/.persistenceCore/data/priv_validator_state.json
wget -O $HOME/.persistenceCore/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Persistence/Testnet/addrbook.json"
sudo systemctl restart persistenceCore && journalctl -fu persistenceCore -o cat

Useful Tools

🔥EXPLORER-M🔥: https://explorer.stavr.tech/Persistence-Mainnet Indexer "ON" 🔥EXPLORER-T🔥: https://explorer.stavr.tech/Persistence-Testnet Indexer "ON" 🔥API-M🔥: https://persistence.api.m.stavr.tech 🔥API-T🔥: https://persistence.api.t.stavr.tech 🔥RPC-M🔥: https://persistence.rpc.m.stavr.tech Snapshot-interval = 1000 🔥RPC-T🔥: https://persistence.rpc.t.stavr.tech Snapshot-interval = 1000 🔥gRPC-M🔥: persistence.grpc.m.stavr.tech:410 🔥gRPC-T🔥: persistence.grpc.t.stavr.tech:420

• Seed-M

[e-mail]:4056

• Seed-T

[e-mail]:4156

• Addrbook-M

wget -O $HOME/.persistenceCore/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Persistence/addrbook.json"

• Addrbook-T

wget -O $HOME/.persistenceCore/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Persistence/Testnet/addrbook.json"

• Genesis-M

wget -L -O $HOME/.persistenceCore/config/genesis.json https://server-1.stavr.tech/Mainnet/Persistence/genesis.json

• Genesis-T

wget -O $HOME/.persistenceCore/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Persistence/Testnet/genesis.json"

• WASM-M

curl -o - -L https://persis-m.wasm.stavr.tech/wasm-persis.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.persistenceCore

• Auto_install_script-M

source <(curl -s https://raw.githubusercontent.com/111STAVR111/props/refs/heads/main/Persistence/persism)

• Auto_install_script-T

wget -O persist https://raw.githubusercontent.com/111STAVR111/props/main/Persistence/Testnet/persist && chmod +x persist && ./persist

🔥Decentralization Info🔥

RPC Scanning

We scan nodes in real time every 4 hours. And we provide the final result of RPC endpoints. We cannot influence the operation of these nodes in any way.

If Voting Power is higher than 0 --> then the Node is a validator of the network and may be subject to attack and be a potential threat to the chain.

We marked such validators with a red symbol