⛓️StateSync/Snapshot

🔥Quicksilver🔥

MAINNET

Node installation instructions

StateSync Quicksilver Mainnet

SNAP_RPC=https://quick.rpc.m.stavr.tech:443
peers="[e-mail]:21026"
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.quicksilverd/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 300)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)
echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH
sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.quicksilverd/config/config.toml
quicksilverd tendermint unsafe-reset-all --home $HOME/.quicksilverd
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/addrbook.json"
systemctl restart quicksilverd && sudo journalctl -fu quicksilverd -o cat

SnapShot Mainnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://quick.snapshot.stavr.tech/quick-snap.tar.lz4 | grep "last" && curl -sI https://quick.snapshot.stavr.tech/quick-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop quicksilverd
cp $HOME/.quicksilverd/data/priv_validator_state.json $HOME/.quicksilverd/priv_validator_state.json.backup
rm -rf $HOME/.quicksilverd/data
curl -o - -L https://quick.snapshot.stavr.tech/quick-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.quicksilverd --strip-components 2
mv $HOME/.quicksilverd/priv_validator_state.json.backup $HOME/.quicksilverd/data/priv_validator_state.json
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/addrbook.json"
systemctl restart quicksilverd && sudo journalctl -fu quicksilverd -o cat

TESTNET

Node installation instructions

StateSync Quicksilver Testnet

SNAP_RPC=https://quick.rpc.t.stavr.tech:443
peers="[e-mail]:20026"
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.quicksilverd/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 100)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" ~/.quicksilverd/config/config.toml
quicksilverd tendermint unsafe-reset-all --home $HOME/.quicksilverd
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"
systemctl restart quicksilverd && sudo journalctl -fu quicksilverd -o cat

SnapShot Testnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | grep "last" && curl -sI https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop quicksilverd
cp $HOME/.quicksilverd/data/priv_validator_state.json $HOME/.quicksilverd/priv_validator_state.json.backup
rm -rf $HOME/.quicksilverd/data
curl -o - -L https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.quicksilverd --strip-components 2
mv $HOME/.quicksilverd/priv_validator_state.json.backup $HOME/.quicksilverd/data/priv_validator_state.json
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"
sudo systemctl restart quicksilverd && journalctl -fu quicksilverd -o cat

Useful Tools

🔥EXPLORER-M🔥: https://explorer.stavr.tech/Quicksilver-Mainnet Indexer "ON" 🔥EXPLORER-T🔥: https://explorer.stavr.tech/QuicksilverIndexer "ON" 🔥API-M🔥: https://quick.api.m.stavr.tech 🔥API-T🔥: https://quick.api.t.stavr.tech 🔥RPC-M🔥: https://quick.rpc.m.stavr.tech Snapshot-interval = 300 🔥RPC-T🔥: https://quick.rpc.t.stavr.tech Snapshot-interval = 100 🔥gRPC-M🔥: quick.grpc.m.stavr.tech:9113 🔥gRPC-T🔥: quick.rpc.t.stavr.tech:9113

• Seed-M

[e-mail]:21026

• Seed-T

[e-mail]:20026

• Addrbook-M

wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/addrbook.json"

• Addrbook-T

wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"

• Genesis-M

wget -L -O $HOME/.quicksilverd/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/genesis.json"

• Genesis-T

wget -L -O $HOME/.quicksilverd/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/genesis.json"

• Auto_install_script-M

wget -O quick https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/quick && chmod +x quick && ./quick

• Auto_install_script-T

wget -O quicktest https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/quicktest && chmod +x quicktest && ./quicktest

🔥Decentralization Info🔥

RPC Scanning

We scan nodes in real time every 4 hours. And we provide the final result of RPC endpoints. We cannot influence the operation of these nodes in any way.

If Voting Power is higher than 0 --> then the Node is a validator of the network and may be subject to attack and be a potential threat to the chain.

We marked such validators with a red symbol