⛓️StateSync/Snapshot

πŸ”₯SgeπŸ”₯

MAINNET

StateSync Sge Mainnet

SNAP_RPC=https://sge.rpc.m.stavr.tech:443
peers="58a458a7136da7e8cc55357999aa89f5fd262588@sge.peers.stavr.tech:1156"
sed -i 's|^persistent_peers *=.*|persistent_peers = "'$peers'"|' $HOME/.sge/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 100)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.sge/config/config.toml
sged tendermint unsafe-reset-all --home /root/.sge
wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/addrbook.json"
systemctl restart sged && journalctl -fu sged -o cat

SnapShot Mainnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://sge.snapshot.stavr.tech/sge-snap.tar.lz4 | grep "last" && curl -sI https://sge.snapshot.stavr.tech/sge-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop sged
cp $HOME/.sge/data/priv_validator_state.json $HOME/.sge/priv_validator_state.json.backup
rm -rf $HOME/.sge/data
curl -o - -L https://sge.snapshot.stavr.tech/sge-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.sge --strip-components 2
mv $HOME/.sge/priv_validator_state.json.backup $HOME/.sge/data/priv_validator_state.json
wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/addrbook.json"
systemctl restart sged && journalctl -fu sged -o cat

TESTNET

StateSync Sge Testnet

SNAP_RPC=https://sge.rpc.t.stavr.tech:443
peers="e2c5f2a902b7e6b8c006008e962ab4ddd70cdd78@sge.peers-t.stavr.tech:1146"
sed -i 's|^persistent_peers *=.*|persistent_peers = "'$peers'"|' $HOME/.sge/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 100)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.sge/config/config.toml
sged tendermint unsafe-reset-all --home /root/.sge
wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/Testnet/addrbook.json"
curl -o - -L https://sge-t.snapshot.stavr.tech/wasm-sget.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.sge
systemctl restart sged && journalctl -fu sged -o cat

SnapShot Testnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://sge-t.snapshot.stavr.tech/sget-snap.tar.lz4 | grep "last" && curl -sI https://sge-t.snapshot.stavr.tech/sget-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop sged
cp $HOME/.sge/data/priv_validator_state.json $HOME/.sge/priv_validator_state.json.backup
rm -rf $HOME/.sge/data
curl -o - -L https://sge-t.snapshot.stavr.tech/sget-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.sge --strip-components 2
curl -o - -L https://sge-t.snapshot.stavr.tech/wasm-sget.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.sge
mv $HOME/.sge/priv_validator_state.json.backup $HOME/.sge/data/priv_validator_state.json
wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/Testnet/addrbook.json"
systemctl restart sged && journalctl -fu sged -o cat

Useful Tools

πŸ”₯EXPLORER-MπŸ”₯: https://explorer.stavr.tech/Sge-Mainnet Indexer "ON" πŸ”₯EXPLORER-TπŸ”₯: https://explorer.stavr.tech/Sge-Testnet Indexer "ON" πŸ”₯API-MπŸ”₯: https://sge.api.m.stavr.tech πŸ”₯API-TπŸ”₯: https://sge.api.t.stavr.tech πŸ”₯RPC-MπŸ”₯: https://sge.rpc.m.stavr.tech Snapshot-interval = 300 πŸ”₯RPC-TπŸ”₯: https://sge.rpc.t.stavr.tech Snapshot-interval = 100 πŸ”₯gRPC-MπŸ”₯: sge.grpc.m.stavr.tech:543 πŸ”₯gRPC-TπŸ”₯: sge.grpc.t.stavr.tech:543

  • Seed-M

58a458a7136da7e8cc55357999aa89f5fd262588@sge.peers.stavr.tech:1156
  • Seed-T

e2c5f2a902b7e6b8c006008e962ab4ddd70cdd78@sge.peers-t.stavr.tech:1146
  • Addrbook-M

wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/addrbook.json"
  • Addrbook-T

wget -O $HOME/.sge/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/Testnet/addrbook.json"
  • Genesis-M

wget -L -O $HOME/.sge/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/genesis.json"
  • Genesis-T

wget -L -O $HOME/.sge/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Sge/Testnet/genesis.json"
  • Auto_install_script-M

wget -O sggem https://raw.githubusercontent.com/111STAVR111/props/main/Sge/sggem && chmod +x sggem && ./sggem
  • Auto_install_script-T

wget -O sgge https://raw.githubusercontent.com/111STAVR111/props/main/Sge/Testnet/sgge && chmod +x sgge && ./sgge
  • Wasm-T

curl -o - -L https://sge-t.snapshot.stavr.tech/wasm-sget.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.sge

πŸ”₯Decentralization InfoπŸ”₯

RPC Scanning

We scan nodes in real time every 4 hours. And we provide the final result of RPC endpoints. We cannot influence the operation of these nodes in any way.

If Voting Power is higher than 0 --> then the Node is a validator of the network and may be subject to attack and be a potential threat to the chain.
We marked such validators with a red symbol

Last updated