StateSync/Snapshot

PreviousNode Installation NextSync Checker

Last updated 4 months ago

Was this helpful?

StateSync/Snapshot

🔥Quicksilver🔥

MAINNET

StateSync Quicksilver Mainnet

systemctl stop quicksilverd
SNAP_RPC=https://quick.rpc.m.stavr.tech:443
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.quicksilverd/config/config.toml
quicksilverd tendermint unsafe-reset-all --home /root/.quicksilverd
wget -O $HOME/.quicksilverd/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Quicksilver/addrbook.json"
sudo systemctl restart quicksilverd && journalctl -fu quicksilverd -o cat

SnapShot Mainnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://server-1.stavr.tech/Mainnet/Quicksilver/quick-snap-1.tar.lz4 | grep "last" && curl -sI https://server-1.stavr.tech/Mainnet/Quicksilver/quick-snap-1.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop quicksilverd
cp $HOME/.quicksilverd/data/priv_validator_state.json $HOME/.quicksilverd/priv_validator_state.json.backup
rm -rf $HOME/.quicksilverd/data
LATEST_SNAPSHOT=$(curl -s https://server-1.stavr.tech/Mainnet/Quicksilver/ | grep -oE 'quick-snap-[0-9]+\.tar\.lz4' | while read SNAPSHOT; do HEIGHT=$(curl -s "https://server-1.stavr.tech/Mainnet/Quicksilver/${SNAPSHOT%.tar.lz4}-info.txt" | awk '/Block height:/ {print $3}'); echo "$SNAPSHOT $HEIGHT"; done | sort -k2 -nr | head -n 1 | awk '{print $1}')
curl -o - -L https://server-1.stavr.tech/Mainnet/Quicksilver/$LATEST_SNAPSHOT | lz4 -c -d - | tar -x -C $HOME/.quicksilverd
mv $HOME/.quicksilverd/priv_validator_state.json.backup $HOME/.quicksilverd/data/priv_validator_state.json
wget -O $HOME/.quicksilverd/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Quicksilver/addrbook.json"
sudo systemctl restart quicksilverd && journalctl -fu quicksilverd -o cat

TESTNET

StateSync Quicksilver Testnet

SNAP_RPC=https://quick.rpc.t.stavr.tech:443
peers="b3b0b1dfa5feb35b6ed88f409c2e9182784e122c@quickt.peers.stavr.tech:20026"
sed -i.bak -e "s/^persistent_peers *=.*/persistent_peers = \"$peers\"/" $HOME/.quicksilverd/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 100)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" ~/.quicksilverd/config/config.toml
quicksilverd tendermint unsafe-reset-all --home $HOME/.quicksilverd
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"
systemctl restart quicksilverd && sudo journalctl -fu quicksilverd -o cat

SnapShot Testnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | grep "last" && curl -sI https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
apt install lz4
sudo systemctl stop quicksilverd
cp $HOME/.quicksilverd/data/priv_validator_state.json $HOME/.quicksilverd/priv_validator_state.json.backup
rm -rf $HOME/.quicksilverd/data
curl -o - -L https://quickt.snapshot.stavr.tech/quickt-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.quicksilverd --strip-components 2
mv $HOME/.quicksilverd/priv_validator_state.json.backup $HOME/.quicksilverd/data/priv_validator_state.json
wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"
sudo systemctl restart quicksilverd && journalctl -fu quicksilverd -o cat

Useful Tools

Seed-M

f2846ba84070d3fdc21c09ef44bac4eeed2f8722@quick.peers.stavr.tech:21026

Seed-T

b3b0b1dfa5feb35b6ed88f409c2e9182784e122c@quickt.peers.stavr.tech:20026

Addrbook-M

wget -O $HOME/.quicksilverd/config/addrbook.json "https://server-1.stavr.tech/Mainnet/Quicksilver/addrbook.json"

Addrbook-T

wget -O $HOME/.quicksilverd/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/addrbook.json"

Genesis-M

wget -O $HOME/.quicksilverd/config/genesis.json "https://server-1.stavr.tech/Mainnet/Quicksilver/genesis.json"

Genesis-T

wget -L -O $HOME/.quicksilverd/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/genesis.json"

Auto_install_script-M

source <(curl -s https://raw.githubusercontent.com/111STAVR111/props/refs/heads/main/Quicksilver/quick)

Auto_install_script-T

wget -O quicktest https://raw.githubusercontent.com/111STAVR111/props/main/Quicksilver/Testnet/quicktest && chmod +x quicktest && ./quicktest

RPC Scanning

We scan nodes in real time every 4 hours. And we provide the final result of RPC endpoints. We cannot influence the operation of these nodes in any way.

If Voting Power is higher than 0 --> then the Node is a validator of the network and may be subject to attack and be a potential threat to the chain.

We marked such validators with a red symbol