⛓️StateSync/Snapshot

🔥Juno🔥

MAINNET

Node installation instructions

StateSync Juno Mainnet

SNAP_RPC=https://juno.rpc.m.stavr.tech:443
PEERS="[e-mail]:1066"
sed -i.bak -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.juno/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)

echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.juno/config/config.toml
junod tendermint unsafe-reset-all
sed -i -e "s/^snapshot-interval *=.*/snapshot-interval = \"1500\"/" $HOME/.juno/config/app.toml
curl -o - -L https://juno.wasm.stavr.tech/wasm-juno.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.juno/ --strip-components 2
wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/addrbook.json"
sudo systemctl restart junod && journalctl -fu junod -o cat

SnapShot Mainnet - updated every 5 hours

You can check the size and time of snapshot creation with this command curl -sI https://juno.snapshot.stavr.tech/juno-snap.tar.lz4 | grep "last" && curl -sI https://juno.snapshot.stavr.tech/juno-snap.tar.lz4 | grep content-length | awk '{printf "%.2f GB\n", $2/1024/1024/1024}'

cd $HOME
snap install lz4
sudo systemctl stop junod
cp $HOME/.juno/data/priv_validator_state.json $HOME/.juno/priv_validator_state.json.backup
rm -rf $HOME/.juno/data
curl -o - -L https://juno.snapshot.stavr.tech/juno-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.juno --strip-components 2
mv $HOME/.juno/priv_validator_state.json.backup $HOME/.juno/data/priv_validator_state.json
wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/addrbook.json"
sudo systemctl restart junod && journalctl -fu junod -o cat

TESTNET

Node installation instructions

StateSync Juno Testnet (Temporarily stopped)

SNAP_RPC=https://juno.rpc.t.stavr.tech:443
PEERS="[e-mail]:1166"
sed -i.bak -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.juno/config/config.toml
LATEST_HEIGHT=$(curl -s $SNAP_RPC/block | jq -r .result.block.header.height); \
BLOCK_HEIGHT=$((LATEST_HEIGHT - 1000)); \
TRUST_HASH=$(curl -s "$SNAP_RPC/block?height=$BLOCK_HEIGHT" | jq -r .result.block_id.hash)
echo $LATEST_HEIGHT $BLOCK_HEIGHT $TRUST_HASH

sed -i.bak -E "s|^(enable[[:space:]]+=[[:space:]]+).*$|\1true| ; \
s|^(rpc_servers[[:space:]]+=[[:space:]]+).*$|\1\"$SNAP_RPC,$SNAP_RPC\"| ; \
s|^(trust_height[[:space:]]+=[[:space:]]+).*$|\1$BLOCK_HEIGHT| ; \
s|^(trust_hash[[:space:]]+=[[:space:]]+).*$|\1\"$TRUST_HASH\"| ; \
s|^(seeds[[:space:]]+=[[:space:]]+).*$|\1\"\"|" $HOME/.juno/config/config.toml
junod tendermint unsafe-reset-all --home $HOME/.juno
sed -i -e "s/^snapshot-interval *=.*/snapshot-interval = \"1500\"/" $HOME/.juno/config/app.toml
curl -o - -L http://juno-t.wasm.stavr.tech:1021/wasm-junot.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.juno/ --strip-components 2
wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/Testnet/addrbook.json"
sudo systemctl restart junod && journalctl -u junod -f -o cat

SnapShot Testnet - updated every 5 hours (Temporarily stopped)

cd $HOME
snap install lz4
sudo systemctl stop junod
cp $HOME/.juno/data/priv_validator_state.json $HOME/.juno/priv_validator_state.json.backup
rm -rf $HOME/.juno/data
curl -o - -L http://junot.snapshot.stavr.tech:1030/junot/junot-snap.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.juno --strip-components 2
curl -o - -L http://juno-t.wasm.stavr.tech:1021/wasm-junot.tar.lz4 | lz4 -c -d - | tar -x -C $HOME/.juno/ --strip-components 2
mv $HOME/.juno/priv_validator_state.json.backup $HOME/.juno/data/priv_validator_state.json
wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/Testnet/addrbook.json"
sudo systemctl restart junod && journalctl -u junod -f -o cat

Useful Tools

🔥EXPLORER-M🔥: https://explorer.stavr.tech/Juno Indexer "ON" 🔥EXPLORER-T🔥: https://explorer.stavr.tech/Juno-Testnet Indexer "ON" 🔥API-M🔥: https://juno.api.m.stavr.tech 🔥API-T🔥: https://juno.api.t.stavr.tech 🔥RPC-T🔥: https://juno.rpc.t.stavr.tech Snapshot-interval = 1000 🔥RPC-M🔥: https://juno.rpc.m.stavr.tech Snapshot-interval = 1000 🔥gRPC-M🔥: juno.grpc.m.stavr.tech:504 🔥gRPC-T🔥: juno.grpc.t.stavr.tech:504

• Seed-M

[e-mail]:1066

• Seed-T

[e-mail]:1166

• Addrbook-M

wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/addrbook.json"

• Addrbook-T

wget -O $HOME/.juno/config/addrbook.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/Testnet/addrbook.json"

• Genesis-M

wget -O $HOME/.juno/config/genesis.json "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/genesis.json"

• Genesis-T

curl -s "https://raw.githubusercontent.com/111STAVR111/props/main/Juno/Testnet/genesis.json" > ~/.juno/config/genesis.json

• Auto_install_script-M

wget -O jun https://raw.githubusercontent.com/111STAVR111/props/main/Juno/jun && chmod +x jun && ./jun

• Auto_install_script-T

wget -O juno-t https://raw.githubusercontent.com/111STAVR111/props/main/Juno/Testnet/juno-t && chmod +x juno-t && ./juno-t

🔥Decentralization Info🔥

RPC Scanning

We scan nodes in real time every 4 hours. And we provide the final result of RPC endpoints. We cannot influence the operation of these nodes in any way.

If Voting Power is higher than 0 --> then the Node is a validator of the network and may be subject to attack and be a potential threat to the chain.

We marked such validators with a red symbol